Full-Service - one of our strengths!

In addition to the machining of thermosets, we also turn and mill components made of thermoplastic materials, synthetic resin-compressed wood and various special materials.

As a system supplier we supply industry-specific products and services from a single source.

We are happy to help!
Staumauer mit Blick auf Stausee

Competence in Composites – one of our strengths!

WeButex´s core competence lies in the selection and machining of all common qualities of laminated materials to EN 60893/61212 and DIN 7735.

Innovative material qualities have envolved in the field of thermosets from the combination of different carrier-resin systems. Depending on the application and technical requirements, these fulfil the claim to be a constructio material of the future.

We are happy to help!

Filament Winding

We supply wound rings based of glass roving, glass mats and glass fabric with added polyester or epoxy resins in thermal class F (155 ° C) and H (180 ° C).

The benefits of our wound rings at a glance:

  • High thermal stability
  • Excellent mechanical strength
  • Particularly high dimensional stability
  • Limited moisture absorption

Wound rings that have been machined according to specification drawings are used in generator construction, high performance engineering and transport engineering.

We are happy to help!

Decorative laminates

We offer a wide range of decorative laminates that are used in the construction industry, the furniture industry and interiors.

The entire collection is characterised by high quality, modern designs and a rich variety of colours.

Our decorative laminates find use in facade and interior decoration, are weather resistant and guarantee colour fastness due to the special UV filter layers.

We supply ready-made pre-cut and milled parts according to the architect’s specifications with building approval, flame retardant according to DIN 4102, available in thicknesses of 6, 8 and 10 mm.

In addition to machined pre-cut and milled parts you can also purchase matching screws in the original varnish for mounting on facades and balconies.

We are happy to help!

Rubber-cork

We supply different grades of rubber-cork in the form of whole panels, pre-cut parts and rolls together with punched and finished parts.

Benefits of rubber-cork at a glance:

  • High elasticity
  • Frost and corrosion resistance
  • Petrol and oil resistance

In addition to the main application in transformer manufacturing, rubber-cork is used as a moulding or sealing element in the automobile industry, in shipbuilding and in aerospace engineering.

We are happy to help!

Moulding

We supply custom moulded parts made from thermosets for many mechanical, electrical, electronic and chemical applications.

Individual tools are used to shape different carrier resin components.

The advantages of our mouldings at a glance:

  • High thermal stability
  • Excellent mechanical strength
  • Particularly high dimensional stability
  • Low moisture absorption
  • Complex shapes
  • Tight tolerances without any finishing work
We are happy to help!

Heater plate mica / mica

Heater plate mica was designed specifically for a a wide range of heating elements with high requirement as regards thermal and electrical insulation.

It has a high chemical resistance, low thermal conductivity and high dielectric strength.

The main applications for components made of heater plate mica are to be found in the following areas:

  • Construction of induction, arc and high frequency ovens
  • High voltage applications
  • High temperature applications
  • Sealing industries (e.g. oil & gas sales)
  • Heating elements for electrical and thermomechanical applications

We process heater plate mica to customer requirements and supply panels and pre-cut parts with thicknesses ranging from 0.8 to 80 mm.

We are happy to help!

Bent components

As one of the leading full-service-suppliers for machining of thermoset materials we also offer the machining of thermoplastic materials in computer-controlled and conventional machining centres.

We complete our service by milling and bending of transparent composites.

From simple profiles to complex bent components we produce covers and protective casings of transparent and impact resistant composites, for example PMMA, PC, Makrolon and Lexan.

We bend and machine parts according to the customer´s specifications for several applications:

  • protection for persons, items or food against contact, damage or accident (machinery, switchboards, food industry, showcases)
  • covers for machines and lightings
  • dust, splash and noise protection
We are happy to help!

Transformer wood

We process all common grades of synthetic resin-compressed wood according to DIN 7707, IEC 61061 using constituents such as selected peeled veneers of beech and special synthetic resins.

By impregnation or pressing under high pressure and temperature, a homogenous material is created with excellent technical properties.

Different product qualities can be achieved by varying the material structure, resinification and compaction.

We are happy to help!
  • Mechanical strength
  • Excellent thermal and electrical insulation
  • Resistant to water, oil, weak acids and alkalis
  • Wear resistance
  • Dimensional stabilityt
  • Noise reduction
  • Corrosion resistance
  • Transformer construction
  • Tool and fixture construction
  • Mechanical Engineering
  • Architecture
  • Cryogenics
  • Foundry Technology
  • Racing
  • KP20212
  • KP20214
  • KP20218
  • KP20222
  • KP20224
  • KP20228
  • KP20242
  • KP20244
  • KP20216
  • KP20226
  • KP20226
  • KP20226
  • KP20226
  • KP20227
  • KP20227
  • KP20215

YOU HAVE QUESTIONS?

We are happy to help!

Peter Schmitz

Project management / Sales